Air-cooled Rebar Mesh for RC Structural Plate Members
Air-cooled Rebar Mesh for RC Structural Plate Members
TATA Steel – All Regions
Generally welded wire meshes produced from cold drawing of wires have high strength but fall behind in ductility parameters such as elongation (%) and UTS/YS ratio compared to TMT bars. Therefore, usage of welded wire mesh was limited to selected applications in concrete structures.
However, now rebar meshes manufactured using air cooled technology, we are able to produce meshes with high ductility i.e better elongation and better TS to YS ratio. This makes the mesh ideal for use in earthquake resistant structures.
Characteristics
Properties – Sm@rtFAB (Air- cooled mesh)
Min. UTS[Ultimate tensile strength] (Mpa) – 595
Min. YS[Yield strength] (Mpa) – 550
Min. %[Percentage] elongation – 16%
Weld shear strength – ~0.40 times
Applications
Mantri Energia Project, Bangalore – 2019
Categories
constructsteel is not liable for the solutions and products displayed. The companies/solutions providers are solely responsible for the information provided.
All images on this page are used with permission or believed to be in the public domain. If you believe any image infringes your copyright, please contact us at constructsteel@worldsteel.org for prompt resolution.
To upload a product, click here
To view FAQ's, click here
Related Products
Bi-axial Welded Mesh Gabion
Gabion walls are executed mainly in the purpose of soil stabilisation behind the wall, but it can also be executed as a cover wall.
Sm@rtFAB mesh in Shotcrete for Earth Retaining Structures
Shotcrete is a method of applying concrete projected at high velocity primarily on to a vertical or overhead surface to strengthen temporary and permanent excavations, earth retaining structures, tunnels, canal linings etc.